Aquatic environment

Performance of a completely autotrophic nitrogen removal over nitrite process for treating wastewater with different substrates at ambient temperature


Xiaoyan Chang , Dong Li , Yuhai Liang , Zhuo Yang , Shaoming Cui , Tao Liu , Huiping Zeng , Jie Zhang

DOI:10.1016/S1001-0742(12)60094-1

Received June 25, 2012,Revised October 12, 2012, Accepted , Available online April 04, 2013

Volume ,2013,Pages 688-697

The stability and parameters of a bio-ceramic filter for completely autotrophic nitrogen removal were investigated. The completely autotrophic nitrogen removal over nitrite (CANON) reactor was fed with different concentrations of ammonia (400, 300, and 200 mg N/L) but constant influent ammonia load. The results showed that the CANON system can achieve good treatment performance at ambient temperature (15-23℃). The average removal rate and removal loading of NH4+-N and TN was 83.90%, 1.26 kg N/(m3·day), and 70.14%, 1.09 kg N/(m3·day), respectively. Among the influencing factors like pH, dissolved oxygen and alkalinity, it was indicated that the pH was the key parameter of the performance of the CANON system. Observing the variation of pH would contribute to better control of the CANON system in an intuitive and fast way. Denaturing gradient gel electrophoresis analysis of microorganisms further revealed that there were some significant changes in the community structure of ammonium oxidizing bacteria, which had low diversity in different stages, while the species of anaerobic ammonium oxidizing (anammox) bacteria were fewer and the community composition was relatively stable. These observations showed that anaerobic ammonia oxidation was more stable than the aerobic ammonia oxidation, which could explain that why the CANON system maintained a good removal efficiency under the changing substrate conditions.

Copyright © Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved. 京ICP备05002858号-3