Characterization of dissolved organic matter and membrane fouling in coagulation-ultrafiltration process treating micro-polluted surface water


Fan Bu , Baoyu Gao , Qinyan Yue , Xue Shen , Wenyu Wang

DOI:10.1016/j.jes.2018.04.015

Received December 03, 2017,Revised January 01, 1900, Accepted April 17, 2018, Available online April 24, 2018

Volume 75,2019,Pages 318-324

Coagulation–ultrafiltration (C–UF) is widely used for surface water treatment. With the removal of pollutants, the characteristics of organic matter change and affect the final treatment efficiency and the development of membrane fouling. In this study, we built a dynamic C–UF set-up to carry out the treatment of micro-polluted surface water, to investigate the characteristics of dissolved organic matter from different units. The influences of poly aluminum chloride and poly dimethyldiallylammonium chloride (PDMDAAC) on removal efficiency and membrane fouling were also investigated. Results showed that the dosage of PDMDAAC evidently increased the UV254 and dissolved organic carbon removal efficiencies, and thereby alleviated membrane fouling in the C–UF process. Most hydrophobic bases (HoB) and hydrophobic neutral fractions could be removed by coagulation. Similarly, UF was good at removing HoB compared to hydrophilic substances (HiS) and hydrophobic acid (HoA) fractions. HiS and HoA fractions with low molecule weight accumulated on the surface of the membrane, causing the increase of transmembrane pressure (TMP). Membrane fouling was mainly caused by a removable cake layer, and mechanical cleaning was an efficient way to decrease the TMP.

Copyright © Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved. 京ICP备05002858号-3